The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox
TRP-C08
From NUUO Wiki
SCB-C08 is an independent control device for managing signals from RS-232 and RS-485. Devices such as I/O relay device or speed dome can be easily control by SCB-C08.
Power Connection (USB Internal Bus)
Direct power input from USB bus port, current 100mA/+5V, no external power necessary
RS-232 wiring connection
The RS-232 supports 5 channels plus Signal Ground and is configured as DTE like a computer. Signals are single ended and referred to Ground. To use handshaking or flow control user must set Host PC’s RTS/CTS during configuration. Refer to the pin assignment for connection as below.
RS-485 Wiring connection
The RS-485 mode supports the Transmit and Receive channels using 2-wire half-duplex operation. Refer to the pin assignment for connection as below.
