The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox
SCB-5000 Series driver
From NUUO Wiki
SCB-5000 driver overview (version 3.0.2)
SCB-5000 capture card is NOT officially supported by Windows Vista. Although it is possible that SCB-5000 cards will be supported by Windows Vista in the future, we currently has no plan to do so. If you have an urgent request for Windows Vista support on SCB-5000 series, please contact us at eHelpdesk.
Your operating system can't communicate with SCB-5000 series capture card without the driver.
SCB-5000 driver installation
You have to install the driver after physically insert the SCB-5000 series capture card into the appropriate PCI slots on the computer's motherboard.
- You will need to complete this process 2 times for SCB-5008 and 4 times for SCB-5016
- You will see 2 [NUUO H264 SeriesV2'] in Windows [Device Manager] and 4 for SCB-5016
1.) Insert the H.264 installation CD
2.) Select [Install from a list or specific location (Advanced)] in the [Found New Hardware Wizard]
3.) Browse for the [Driver] folder in the CD and click [OK]
4.) Please wait while Windows searches for the driver (might take a few minutes)
5.) Select the driver - [NUUO H264 SeriesV2] and click on [Next]
6.) Click on [Continue Anyway]
7.) Please wait for the Windows to install the driver (might take a few minutes)
8.) The installation is now finished and you should see [NUUO H264 SeriesV2'] in Windows [Device Manager]
- You will need to complete this process 2 times for SCB-5008 and 4 times for SCB-5016
- You will see 2 [NUUO H264 SeriesV2'] in Windows [Device Manager] and 4 for SCB-5016
