The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox
NVRmini motion detection as recording trigger
From NUUO Wiki
NVRmini motion detection as recording trigger
NVRmini motion detection can be used to trigger recording, commonly known as motion recording or record on motion. In other words, video will only begin recording when the movement is detected within the defined region.
NVRmini motion detection as recording trigger overview
1.) In the web interface of the camera, go to [Setup]->[Event Configuration]->[Motion Detection]
- The example uses Axis 214, the actual location of motion detection could be different for other camera models.
2.) Define the region of motion detection then click [Save]
3.) Login to NVRmini and add the IP camera in [Camera Setting]
- Use admin account and password ONLY (other accounts will give you problems)
4.) Go to [Recording & Event]->[Recording Settings]->[Recording Schedule] select a camera then click on [Configure]
5.) In [Schedule Configuration], select [Record on Motion] and select the camera(s) which need to start recording on motion detection.
- You can select multiple cameras to record on motion detection from current camera. For example, cameras 1, 2 and 3 will begin recording when motion is detected on camera 1.
6.) Click [OK] to save.
6.) Go to [Recording Mode], select [Recording by Schedule] and click [Save] to finish.
7.) In [Live View], the blue ball indicates that the camera is set to record on event but it is not actually recording files yet because the event is not being triggered. The ball turns red if an event is triggered and the videos are saved into the hard drive depending on the length of the event.
