The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox

From NUUO Wiki

Local Area Network (LAN) overview (Windows XP)

NUUO supports both LAN and WAN. If your surveillance system does not need to have internet access, you can setup a private network or LAN to establish networking between NUUO main console and other network devices such as IP camera.

Setup with static IP

1.) Go to [Control Panal]->[Network Connections]

2.) Right click on [Local Area Connection]->[Properties]

3.) Select [Internet Protocol(TCP/IP)]->[Properties]

4.) Select [Use the following IP address:] and fill the fields as shown in the picture

• [192.168.1.1] and [192.168.1.254] is normally occupied by the router or other network devices, so please try to avoid using these IP addresses.

• Please note that you will only be able to access IP address between the same subnet address, such as [192.168.1.1 to 192.168.1.254]

Setup with dynamic IP

We strongly discourage the assigning dynamic IP address to IP cameras which is based on DHCP. The IP address of each IP cameras are temporary so whenever the address is reassigned, the camera will lose connection permanently to your NUUO server unless you manually rematch the camera's new IP address to NUUO server.