The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox

From NUUO Wiki

In order to view remote live viewer and remote playabck in the internet, there are two things you have to do.

1.) Start an IE browser and connect to your NVRmini.

Please go to <Network Setup> - <Network Service>.

Our default port number for live view is 5150.

Our default port number for remote playback is 5160.

The default port number for web browser is 80.

If you need to change the default port number to a different one, please don’t forget to change the port number in the Port Forwarding / Port Redirection on your router as well.

• Please make sure the port numbers you set for web browser, remote live view and remote playback are not occupied by other network devices.

2.) Enable port forwarding on your router

After that, what we have to do is to find the public IP address of your router and set port forwarding on the router to NVR LAN IP.

• You can see the public IP address of your router in its configuration menu.

• You can also configure NAT (or port forwarding) port 80, 5150 and 5160 to your NVR’s LAN IP (e.g. 192.168.3.30) in the router.

• Port forwarding looks something like this in your router:

You have to forward 3 ports, one for 80, one for 5150 and one for 5160.

All 3 ports should point to e.g. 192.168.3.30

After you have successfully forwarded the 3 ports in your router, you will be able to access remote live viewer and remote playback from the Internet.

If you need more information of port fordwarding, please visit here, http://en.wikipedia.org/wiki/Port_forwarding

If you need more information of port forwarding guide for various routers, please visit here, http://www.portforward.com/