The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox

From NUUO Wiki

In order to view remote live viewer and remote playabck from the internet, there are two things you have to do.

1.)Go to network setup -> network service/network setup in NVRmini setting page.

Check the port number of management page, live streaming and remote playback.

Default port number for live streaming is 5150.

Default port number for remote playback is 5160.

Default port for web browser is 80.

If you need to change it to another one, thant’s okay, please don’t forget to set it to port forwarding on your router.

2.) Enable port forwarding in your router

After that, what we have to do is to find the public IP address of your router and set port forwarding on the router to NVRmini LAN IP.

• You can see the public IP address of your router in its configuration menu.

• You can also configure NAT (or port forwarding) port 80, 5150 and 5160 to your NVRmini’s LAN IP (e.g. 192.168.3.30) in the router.

• Port forwarding looks something like this in your router:

You have to forward 3 ports, one for 80, one for 5150 and one for 5160.

All 3 ports should point to e.g. 192.168.3.30

After you have successfully forward the 3 ports in your router, you will be able to access remote live viewer and remote playback from the internet.

If you need more information of port fordwarding, please visit here, http://en.wikipedia.org/wiki/Port_forwarding

If you need more information of port forwarding guide for various routers, please visit here, http://www.portforward.com/

Thank you very much!