The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox

How to control PTZ from analog camera through C08 converter?

From NUUO Wiki

Jump to: navigation, search
  • 1. Connect C08 to the USB port on your PC.
  • 2. Install the C08 driver.
  • 3. Connect your analog PTZ camera to the C08 with RS485.

Image:Analog ptz.jpg


  • 4. Right click on <My Computer> - <Manage> - <Device Manager> - <Port (Com & LPT)> and check the COM Port number for this C08.

You will be able to see a <Prolific USB-to-Serial Comm Port> and this number is your COM Port number for C08.

Take the following picture for example; the COM Port number for C08 is COM3.

Image:Com port.jpg


  • 5. Start NUUO Main Console - <Config> -<Setting> - <PTZ COnfig> and then fill in the Basic Setting, inclusive of Camera model, COM Port, Baud Rate and Address.

Please note: you need to check the analog camera user manual for the PTZ protocol and baud rate.

The PTZ protocols NUUO currently supports are Pelco D, Pelco P, Samsung, Lilin and Dynacolor.

Image:PTZ config.jpg


  • 6. Enjoy !!
Retrieved from "http://support.nuuo.com/mediawiki/index.php/How_to_control_PTZ_from_analog_camera_through_C08_converter%3F"
Personal tools