The wiki is constantly being updated. If you have any question or suggestion, please issue a ticket on eHelpdesk (login required)
How to configure my PC/Server to allow remote access for the viewer and playback?
In order to view remote live viewer and remote playabck from the internet, there are two things you have to do.
1.) Start an IE browser and connect to this NVRmini.
Please go to <Network Setup> - <Network Service>.
Our default port number for live streaming is 5150.
Our default port number for remote playback is 5160.
The default port for web browser is 80.
If you need to change it to another one, thant’s okay, please don’t forget to set it to port forwarding on your router.
Please make sure the port numbers you set for web browser, remote live streaming and remote playback are not occupied by the other network devices.
2.) Enable port forwarding on your router
After that, what we have to do is to find the public IP address of your router and set port forwarding on the router to NVR LAN IP.
• You can see the public IP address of your router in its configuration menu.
• You can also configure NAT (or port forwarding) port 80, 5150 and 5160 to your NVR’s LAN IP (e.g. 192.168.3.30) in the router.
• Port forwarding looks something like this in your router:
You have to forward 3 ports, one for 80, one for 5150 and one for 5160.
All 3 ports should point to e.g. 192.168.3.30
After you have successfully forward the 3 ports in your router, you will be able to access remote live viewer and remote playback from the internet.
If you need more information of port fordwarding, please visit here, http://en.wikipedia.org/wiki/Port_forwarding
If you need more information of port forwarding guide for various routers, please visit here, http://www.portforward.com/