The wiki is constantly being updated. If you have any question or suggestion, please send an email to our service mailbox
How can I control analog camera PTZ on NUUO software?
From NUUO Wiki
Please follow the steps,
1. Connect C08 to the USB port on your PC.
2. Install the C08 driver.
3. Connect your analog PTZ camera to the C08 with RS485.
4. Right click on <My Computer> - <Manage> - <Device Manager> - <Port (Com & LPT)> and check the COM Port number for this C08.
5. Start NUUO Main Console - <Config> -<Setting> - <PTZ COnfig> and then fill in the Basic Setting, inclusive of Camera model, COM Port, Baud Rate and Address.
